Merge pull request #1348 from Dbroqua/master

Added DK60 keyboard

keyboards/dk60/Makefile

@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+	include ../../Makefile
+endif

keyboards/dk60/config.h

@@ -0,0 +1,55 @@
+/*
+Copyright 2017 Damien Broqua <contact@darkou.fr>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+    #define CONFIG_H
+
+    #include "config_common.h"
+
+    /* USB Device descriptor parameter */
+    #define VENDOR_ID       0xFEED
+    #define PRODUCT_ID      0x6060
+    #define DEVICE_VER      0x0003
+    #define MANUFACTURER    DARKOU
+    #define PRODUCT         DK60
+    #define DESCRIPTION     QMK keyboard firmware for DK60 support
+
+    /* key matrix size */
+    #define MATRIX_ROWS 5
+    #define MATRIX_COLS 13
+
+    // ROWS: Top to bottom, COLS: Left to right
+    #define MATRIX_ROW_PINS { B6, B4, D7, D6, D4 }
+    #define MATRIX_COL_PINS { B0, B3, B2, B1, D3, D5, B5, B7, C6, C7, D0, D1, D2 }
+    #define UNUSED_PINS
+
+    /* COL2ROW or ROW2COL */
+    #define DIODE_DIRECTION COL2ROW
+
+    /* Set 0 if debouncing isn't needed */
+    #define DEBOUNCING_DELAY 5
+
+    /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+    #define LOCKING_SUPPORT_ENABLE
+    /* Locking resynchronize hack */
+    #define LOCKING_RESYNC_ENABLE
+
+    /* key combination for command */
+    #define IS_COMMAND() ( \
+        keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+    )
+#endif

keyboards/dk60/dk60.c

@@ -0,0 +1,34 @@
+#include "dk60.h"
+
+void dk60_blink_all_leds(void)
+{
+    dk60_led_all_off();
+    dk60_led_all_on();
+    _delay_ms(500);
+    dk60_led_all_off();
+}
+
+void matrix_init_kb(void) {
+    led_init_ports();
+    dk60_blink_all_leds();
+
+    matrix_init_user();
+}
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    DDRE |= (1<<6);
+    DDRF |= (1<<0);
+}
+
+void led_set_kb(uint8_t usb_led) {
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+		// Turn capslock on
+		dk60_caps_led_on();
+	} else {
+		// Turn capslock off
+		dk60_caps_led_off();
+	}
+
+	led_set_user(usb_led);
+}

keyboards/dk60/dk60.h

@@ -0,0 +1,41 @@
+#ifndef DK60_H
+    #define DK60_H
+
+    #include "quantum.h"
+    #include <util/delay.h>
+
+    inline void dk60_caps_led_on(void)      {  PORTE |= (1<<6); }
+    inline void dk60_esc_led_on(void)    	{  PORTF |= (1<<0); }
+
+    inline void dk60_caps_led_off(void)     { PORTE &= ~(1<<6); }
+    inline void dk60_esc_led_off(void)   	{ PORTF &= ~(1<<0); }
+
+    inline void dk60_led_all_on(void)
+    {
+        dk60_caps_led_on();
+        dk60_esc_led_on();
+    }
+
+    inline void dk60_led_all_off(void)
+    {
+        dk60_caps_led_off();
+        dk60_esc_led_off();
+    }
+
+    #define ___ KC_NO
+
+    #define KEYMAP( \
+        K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K4B, K4A, \
+        K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K4C, \
+        K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \
+        K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+             K41, K42,           K45,           K48, K49  \
+    ) { \
+        { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+        { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
+        { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+        { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \
+        { ___, K41, K42, ___, ___, K45, ___, ___, K48, K49, K4A, K4B, K4C }  \
+    }
+
+#endif

keyboards/dk60/keymaps/default/keymap.c

@@ -0,0 +1,80 @@
+#include "dk60.h"
+#include "action_layer.h"
+
+enum planck_layers {
+  _QWERTY,
+  _FN,
+  _DVORAK,
+  _LOWER,
+  _RAISE,
+  _PLOVER,
+  _ADJUST
+};
+
+enum planck_keycodes {
+  QWERTY = SAFE_RANGE,
+  FN
+};
+
+// Fillers to make layering more clear
+#define ______ KC_TRNS
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty gui/alt/space/alt/gui
+ * ,-----------------------------------------------------------------------------------------.
+ * | Esc |  1  |  2  |  3  |  4  |  5  |  6  |  7  |  8  |  9  |  0  |  -  |  =  |  \  |  `  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Tab    |  Q  |  W  |  E  |  R  |  T  |  Y  |  U  |  I  |  O  |  P  |  [  |  ]  |  Bksp  |
+ * |-----------------------------------------------------------------------------------------+
+ * | Ctrl    |  A  |  S  |  D  |  F  |  G  |  H  |  J  |  K  |  L  |  ;  |  '  |    Enter    |
+ * |-----------------------------------------------------------------------------------------+
+ * | Shift     |  Z  |  X  |  C  |  V  |  B  |  N  |  M  |  ,  |  .  |  /  | RShift    | FN  |
+ * |-----------------------------------------------------------------------------------------+
+ *         |LGUI | LAlt  |               Space                | RAlt   |RGUI |
+ *         `-----------------------------------------------------------------'
+ */
+  [_QWERTY] = KEYMAP( /* Basic QWERTY */
+      KC_ESC,   KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,    KC_9,   KC_0,       KC_MINS,    KC_EQL, KC_BSLS,    KC_GRV, \
+      KC_TAB,   KC_Q,   KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,    KC_O,   KC_P,       KC_LBRC,    KC_RBRC,KC_BSPC,  \
+      KC_LCTL,  KC_A,   KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,    KC_L,   KC_SCLN,    KC_QUOT,    KC_ENT,   \
+      KC_LSFT,  KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT, KC_SLSH,    KC_RSFT,    FN, \
+                KC_LGUI,KC_LALT,                KC_SPC,                          KC_RALT,KC_RGUI \
+      ),
+
+/* FN Layer
+ * ,-----------------------------------------------------------------------------------------.
+ * |     | F1  | F2  | F3  | F4  | F5  | F6  | F7  | F8  | F9  | F10 | F11 | F12 | Ins | Del |
+ * |-----------------------------------------------------------------------------------------+
+ * |  CAPS  |     |     |     |     |     |     |     | Psc | Slck| Paus| Up  |     |        |
+ * |-----------------------------------------------------------------------------------------+
+ * |         | Vol-| Vol+| Mute|     |     | *   | /   | Home| PgUp| Left|Right|             |
+ * |-----------------------------------------------------------------------------------------+
+ * |           | Prev| Play| Next|     |     | +   | -   | End  |PgDn| Down|           |     |
+ * |-----------------------------------------------------------------------------------------+
+ *         |       |       |                                 | Stop  |       |
+ *         `-----------------------------------------------------------------'
+ */
+  [_FN] = KEYMAP( /* Layer 1 */
+      ______, KC_F1,  KC_F2,  KC_F3,  KC_F4,  KC_F5,  KC_F6,  KC_F7,  KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, KC_INS,  KC_DEL, \
+      KC_CAPS,  ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP,   ______, ______,  \
+      ______,   KC_VOLD,KC_VOLU,KC_MUTE,______, ______, KC_PAST,KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______,   \
+      ______,   KC_MPRV,KC_MPLY,KC_MNXT,______, ______, KC_PPLS,KC_PMNS,KC_END,  KC_PGDN, KC_DOWN, ______,  ______,  \
+                ______, ______,                 ______,                 KC_MSTP, ______ \
+      )
+};
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+    case FN:
+      if (record->event.pressed) {
+        layer_on(_FN);
+        dk60_esc_led_on();
+      } else {
+        layer_off(_FN);
+        dk60_esc_led_off();
+      }
+      return false;
+      break;
+  }
+  return true;
+}

keyboards/dk60/readme.md

@@ -0,0 +1,8 @@
+DK60 keyboard firmware
+======================
+
+Another 60% keyboard with different HHKB layout
+
+More information here: https://github.com/Dbroqua/DK60
+
+Open Hardware project!

keyboards/dk60/rules.mk

@@ -0,0 +1,21 @@
+MCU = atmega32u4
+F_CPU = 16000000
+ARCH = AVR8
+F_USB = $(F_CPU)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes	# Audio control and System control(+450)
+# CONSOLE_ENABLE ?= yes	# Console for debug(+400)
+# COMMAND_ENABLE ?= yes    # Commands for debug and configuration
+KEYBOARD_LOCK_ENABLE ?= yes	# Allow locking of keyboard via magic key
+NKRO_ENABLE ?= yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE ?= no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE ?= no  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE ?= no 		# MIDI controls
+AUDIO_ENABLE ?= no
+UNICODE_ENABLE ?= yes 		# Unicode
+BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
+SLEEP_LED_ENABLE ?= yes